|
Round hand grips are our most popular style of
hand grip at GripWorks. This makes sense given
that grips are typically used on round tubes or
bars. Flexible round grips, however, will also
conform to other shapes as long as the outside
diameter of the handle is consistent throughout.
More Sizes
The following chart highlights our extensive line of round grips that
range from 0.187” to 3.500” in diameter. Each set of
tooling can manufacture grips in any length up to the maximum inside
length stated in the chart. Grips measuring up to 24” can be
made for some of the more standard sizes. For the most popular sizes,
both round end and flat end tooling is available.
 Double
Dipping
Round hand grips can be utilized very well in the double
dipping process for creating more functional
or attractive grips.
Materials
All of our vinyl grip materials can be
used on round tooling. Some designs will require liners and some may
have length restrictions, but round hand grips can typically accommodate
any material.
Finishing Operations
Round grips can be printed, punched or sliced into sleeves. Go to our finishing
section for more information.
| Round
Grips - Flat End |
Inside
Diameter
"A"
|
Max
Inside Length
"B"
|
Nominal
Wall Thickness "C"
|
(At Min
Length)
|
(At Max
Length)
|
in
|
mm
|
in ±.062
|
mm ±1.57
|
in ±.010
|
mm ±.25
|
in ±.010
|
mm ±.25
|
| 0.187 |
4.75 |
3.500 |
88.90 |
0.055 |
1.40 |
0.055 |
1.40 |
| 0.207 |
5.26 |
3.500 |
88.90 |
0.055 |
1.40 |
0.055 |
1.40 |
| 0.281 |
7.14 |
5.000 |
127.00 |
0.060 |
1.52 |
0.065 |
1.65 |
| 0.313 |
7.95 |
6.000 |
152.40 |
0.060 |
1.52 |
0.065 |
1.65 |
| 0.375 |
9.53 |
6.000 |
152.40 |
0.065 |
1.65 |
0.075 |
1.91 |
| 0.437 |
11.10 |
6.000 |
152.40 |
0.065 |
1.65 |
0.075 |
1.91 |
| 0.500 |
12.70 |
8.500 |
215.90 |
0.065 |
1.65 |
0.075 |
1.91 |
| 0.562 |
14.27 |
6.000 |
152.40 |
0.065 |
1.65 |
0.075 |
1.91 |
| 0.610 |
15.49 |
6.750 |
171.45 |
0.065 |
1.65 |
0.075 |
1.91 |
| 0.625 |
15.88 |
6.000 |
152.40 |
0.065 |
1.65 |
0.075 |
1.91 |
| 0.687 |
17.45 |
6.000 |
152.40 |
0.065 |
1.65 |
0.075 |
1.91 |
| 0.725 |
18.42 |
24.000 |
609.60 |
0.065 |
1.65 |
0.075 |
1.91 |
| 0.730 |
18.54 |
6.000 |
152.40 |
0.065 |
1.65 |
0.075 |
1.91 |
| 0.750 |
19.05 |
6.000 |
152.40 |
0.065 |
1.65 |
0.075 |
1.91 |
| 0.812 |
20.62 |
6.000 |
152.40 |
0.070 |
1.78 |
0.080 |
2.03 |
| 0.830 |
21.08 |
6.000 |
152.40 |
0.070 |
1.78 |
0.080 |
2.03 |
| 0.843 |
21.41 |
6.000 |
152.40 |
0.070 |
1.78 |
0.080 |
2.03 |
| 0.875 |
22.23 |
24.000 |
609.60 |
0.070 |
1.78 |
0.080 |
2.03 |
| 0.921 |
23.39 |
24.000 |
609.60 |
0.070 |
1.78 |
0.080 |
2.03 |
| 0.937 |
23.80 |
24.000 |
609.60 |
0.070 |
1.78 |
0.080 |
2.03 |
| 0.950 |
24.13 |
6.000 |
152.40 |
0.070 |
1.78 |
0.080 |
2.03 |
| 1.000 |
25.40 |
24.000 |
609.60 |
0.070 |
1.78 |
0.080 |
2.03 |
| 1.062 |
26.97 |
6.000 |
152.40 |
0.070 |
1.78 |
0.080 |
2.03 |
| 1.125 |
28.58 |
24.000 |
609.60 |
0.070 |
1.78 |
0.080 |
2.03 |
| 1.187 |
30.15 |
6.000 |
152.40 |
0.070 |
1.78 |
0.080 |
2.03 |
| 1.220 |
30.99 |
10.000 |
254.00 |
0.070 |
1.78 |
0.080 |
2.03 |
| 1.250 |
31.75 |
6.000 |
152.40 |
0.070 |
1.78 |
0.080 |
2.03 |
| 1.375 |
34.93 |
6.000 |
152.40 |
0.070 |
1.78 |
0.080 |
2.03 |
| 1.500 |
38.10 |
6.000 |
152.40 |
0.070 |
1.78 |
0.080 |
2.03 |
| 1.625 |
41.28 |
6.000 |
152.40 |
0.070 |
1.78 |
0.080 |
2.03 |
| 1.687 |
42.85 |
6.000 |
152.40 |
0.070 |
1.78 |
0.080 |
2.03 |
| 1.750 |
44.45 |
6.000 |
152.40 |
0.070 |
1.78 |
0.080 |
2.03 |
| 2.000 |
50.80 |
6.000 |
152.40 |
0.070 |
1.78 |
0.080 |
2.03 |
| 2.250 |
57.15 |
6.000 |
152.40 |
0.070 |
1.78 |
0.080 |
2.03 |
| 2.500 |
63.50 |
6.000 |
152.40 |
0.070 |
1.78 |
0.080 |
2.03 |
| 2.750 |
69.85 |
6.000 |
152.40 |
0.070 |
1.78 |
0.080 |
2.03 |
| 3.000 |
76.20 |
6.000 |
152.40 |
0.070 |
1.78 |
0.080 |
2.03 |
| 3.250 |
82.55 |
6.000 |
152.40 |
0.070 |
1.78 |
0.080 |
2.03 |
| 3.500 |
88.90 |
6.000 |
152.40 |
0.070 |
1.78 |
0.080 |
2.03 |
| Chart for typical single dip
wall specs - Formulas (Flexfit, Softex, etc.) |
Note: "B" dimension
is measured to inside radius.
Note: "C" dimension
is measured to .250" (6.35
mm) from open end.
Wall thickness tapers
slightly heavier to
closed end. Heavier
or lighter wall thicknesses
are available upon
request.
Every Softex Grips is available in any length up to the maximum
shown, within .062" (1.57 mm) increments.
Standard colors: Black, Red, White, Blue, Green, Orange, Yellow,
Gray. Other colors available upon request. |
| Round Grips
- Round End |
Inside Diameter
"A" |
Max
Inside Length
"B"
|
Nominal
Wall Thickness
"C"
|
(At Min
Length)
|
(At Max
Length)
|
in
|
mm
|
in ±.062
|
mm ±1.57
|
in ±.010
|
mm ±.25
|
in ±.010
|
mm ±.25
|
| 0.165 |
4.19 |
3.500 |
88.90 |
0.055 |
1.40 |
0.055 |
1.40 |
| 0.187 |
4.75 |
3.500 |
88.90 |
0.055 |
1.40 |
0.055 |
1.40 |
| 0.250 |
6.35 |
4.250 |
107.95 |
0.060 |
1.52 |
0.065 |
1.65 |
| 0.305 |
7.75 |
7.000 |
177.80 |
0.060 |
1.52 |
0.065 |
1.65 |
| 0.313 |
7.95 |
6.250 |
158.75 |
0.060 |
1.52 |
0.065 |
1.65 |
| 0.375 |
9.53 |
7.000 |
177.80 |
0.065 |
1.65 |
0.075 |
1.91 |
| 0.437 |
11.10 |
5.250 |
133.35 |
0.065 |
1.65 |
0.075 |
1.91 |
| 0.500 |
12.70 |
5.250 |
133.35 |
0.065 |
1.65 |
0.075 |
1.91 |
| 0.562 |
14.27 |
5.250 |
133.35 |
0.065 |
1.65 |
0.075 |
1.91 |
| 0.600 |
15.24 |
5.750 |
146.05 |
0.065 |
1.65 |
0.075 |
1.91 |
| 0.625 |
15.88 |
11.000 |
279.40 |
0.065 |
1.65 |
0.075 |
1.91 |
| 0.687 |
17.45 |
5.250 |
133.35 |
0.065 |
1.65 |
0.075 |
1.91 |
| 0.750 |
19.05 |
11.000 |
279.40 |
0.065 |
1.65 |
0.075 |
1.91 |
| 0.812 |
20.62 |
8.500 |
215.90 |
0.070 |
1.78 |
0.080 |
2.03 |
| 0.843 |
21.41 |
10.000 |
254.00 |
0.070 |
1.78 |
0.080 |
2.03 |
| 0.875 |
22.23 |
8.500 |
215.90 |
0.070 |
1.78 |
0.080 |
2.03 |
| 0.937 |
23.80 |
11.000 |
279.40 |
0.070 |
1.78 |
0.080 |
2.03 |
| 1.000 |
25.40 |
8.500 |
215.90 |
0.070 |
1.78 |
0.080 |
2.03 |
| 1.062 |
26.97 |
5.250 |
133.35 |
0.070 |
1.78 |
0.080 |
2.03 |
| 1.125 |
28.58 |
5.250 |
133.35 |
0.070 |
1.78 |
0.080 |
2.03 |
| 1.250 |
31.75 |
5.250 |
133.35 |
0.070 |
1.78 |
0.080 |
2.03 |
| 1.500 |
38.10 |
5.250 |
133.35 |
0.070 |
1.78 |
0.080 |
2.03 |
| 1.625 |
41.28 |
5.250 |
133.35 |
0.070 |
1.78 |
0.080 |
2.03 |
| Chart for typical single dip
wall specs - Formulas (Flexfit, Softex, etc.) |
|
